How to Setup

The No-Show Charger installation takes up to 5m and does not require tools.

What's Inside

1 Hotspot Charger

1 Adhesive Tray

1 U-Shaped Magnet

1 Circle Magnet

2 Wire Clips

Step-by-Step Guide

1

Place sticker on desk

2

Place magnet on top of the sticker

3

U-Shaped magnet under the desk

4

Align the magnets

5

Stick charger tray under the desk

6

Remove U-shaped magnet

7

Slide charger into the tray

8

Set your phone on the sticker

Enjoy!

Troubleshooting

The table or desk you're charging through should be no more than 32mm / 1.26in

When you sit your phone down, the charger pairs with your phone’s battery.

If it's not paired, pick up your phone and sit it back down to re-pair it. Sliding your phone around on the desk will not help it re-pair.

If you want to check if your phone pairs with the No-Show charger, plug-in the charger & hover your phone a few mm above the charger; it should automatically activate.

Things that do not work

Charging through metal surfaces will not work

Dropping the phone on the desk but not on the hotspot will not work.

Putting your phone directly on the charger will not work

There must be 5mm or more between the phone and the charger

What's Inside

1 Hotspot Charger

1 Adhesive Tray

1 U-Shaped Magnet

1 Circle Magnet

2 Wire Clips

Step-by-Step Guide

1

Place sticker on desk

2

Place magnet on top of the sticker

3

U-Shaped magnet under the desk

4

Align the magnets

5

Stick charger tray under the desk

6

Remove U-shaped magnet

7

Slide charger into the tray

8

Set your phone on the sticker

Following each step of the directions gives you the fastest possible way to set-up the No-Show Charger kit.

Troubleshooting

The table or desk you're charging through should be no more than 32mm / 1.26in

When you sit your phone down, the charger pairs with your phone’s battery.

If it's not paired, pick up your phone and sit it back down to re-pair it.Sliding your phone around on the desk will not help it re-pair.

If you want to check if your phone pairs with the No-Show charger, plug-in the charger & hover your phone a few mm above the charger; it should automatically activate.

Things that do not work

Charging through metal surfaces will not work

Dropping the phone on the desk but not on the hotspot will not work.

Putting your phone directly on the charger will not work

There must be 5mm or more between the phone and the charger